Filter
Top Products
4-8
Redialling When the Line is Busy
There are two methods of redialling: Manual redialling and Automatic redialling. This section explains these two methods.
■ Manual Redialling
Press Redial/Pause to dial the last number you dialled with the numeric keys. (This starts redialling regardless of whether
automatic redialling is enabled.)
Cancelling Manual Redialling
To cancel manual redialling, press Stop/Reset.
■ Automatic Redialling
The fax automatically redials after the first attempt at sending fails (e.g. the line is busy).
The number of redialling attempts and the time interval between attempts can be adjusted by changing the settings in the AUTO
REDIAL. Automatic redialling can also be set off and on. (→ p. 9-6)
If all attempts are unsuccessful, the machine cancels the transmission and prints an ERROR TX REPORT. (→ p. 7-3)
Cancelling Automatic Redialling
• If you want to cancel a transmission while the machine is waiting to redial, you will have to delete the document from memory using
Memory Reference. (→ p. 4-16)
1 Wait until the machine begins redialling.
2 Press Stop/Reset.
• The machine asks you to confirm that you want to cancel.
3 Press (–) to cancel redialling.
• If you change your mind and want to continue redialling, press (+).
• The machine prints an ERROR TX REPORT. (→ p. 7-3)
CANCEL DURING TX/RX?
< YES NO >
▲
▼
SB_PC1270D_FG_EN.book Page 8 Monday, February 18, 2002 12:20 PM