Filter
Top Products
9-6
2.PAUSE TIME Sets the length of the pause you insert into a dialling sequence.
1 to 15 SEC
3.AUTO REDIAL Sets whether to perform automatic redial when the other line is busy
or no answer.
ON Customises the redial operation.
1.REDIAL TIMES Sets the number of retries.
1 to 10 TIMES
2.REDIAL INTERVAL Sets period of time between rediallings.
2 to 99 MIN.
3.TX ERROR RESEND Redialling is attempted when a transmission error occurred.
ON RESEND TX FROM: Sets the number of pages to be sent when
redialling is attempted.
ERROR & 1ST PAGE, ERROR PAGE, ALL PAGES
OFF Redialling is not attempted when a transmission error has occurred.
OFF After the first attempt at dialling fails, redialling is not attempted.
4.ERASE FAILED TX Sets the ERASE FAILED TX function.
ON The document is deleted from the memory stored in the machine if a
transmission error has occurred.
OFF The document is not deleted from the memory stored in the machine
even if a transmission error has occurred.
5.TIME OUT Enables/disables automatic scanning of documents after the fax
number is entered by using speed dialling.
ON Scanning begins automatically in 5 or 10 seconds after you enter the
phone number.
OFF Press Start to scan document. Otherwise, the machine will return to
standby mode after 2 minutes.
RX SETTINGS Sets the reception functions.
1.ECM RX ECM (error correction mode) receiving is turned on or off.
ON All receptions are conducted with ECM if the other party’s fax
supports ECM.
OFF ECM is turned off.
2.FAX/TEL OPT.SET When FaxTel has been set, the optional settings are available.
1.RING START TIME Sets the duration that the machine listens for a fax tone before
starting to ring.
0 to 30 SEC
2.F/T RING TIME Sets the length of time the machine rings to alert you of an incoming
call.
10 to 60 SEC
Name Descriptions
SB_PC1270D_FG_EN.book Page 6 Monday, February 18, 2002 12:20 PM