Cisco Systems 15454 Switch User Manual


 
4-45
Cisco ONS 15454 Reference Manual, R7.0
78-17191-01
Chapter 4 Optical Cards
4.18 4.18.3 15454_MRC-12 Card-Level Indicators
4.18.3 15454_MRC-12 Card-Level Indicators
Table 4-21 describes the three card-level LEDs on the 15454_MRC-12 card.
STS-192
Available
Bandwidth
(when
installing
additional
SFPs from
the top port
to the
bottom
port)
1
48333 333 333 331281
48 12 12 12 3 3 3 3 3 3 3 3 12 108
48 12 12 12 12 12 12 12 3 3 3 3 12 144
48 12 12 12 12 12 12 12 12 12 12 12 12 180
483 3 3 121212 121212 121212153
48 3 3 3 3 3 3 3 12 12 12 12 12 117
48 48 3 3 3 3 3 3 3 3 10 120
48 48 12 12 12 12 3 3 3 3 10 156
48 48 12 12 12 12 12 12 12 12 10 192
48 48 48 3 3 3 3 7 156
48 48 48 12 12 12 12 7 192
48 48 48 48 4 192
STS-192
Available
Bandwidth
(when
installing
additional
SFPs from
the bottom
port to the
top port)
1
3333 333 3—48—972
3 3 3 3 12 12 12 12 48 9 108
3 121212 121212 12—48 ——9 135
12 12 12 12 12 12 12 12 48 9 144
12 12 12 12 3 3 3 3 48 9 108
12 3 3 3 3 3 3 3 48 9 81
3 3 3 3 ——48——48 ——6108
3 121212——48——48 ——6135
12 12 12 12 48 48 6 144
12 3 3 3 48 48 6 117
3 ——48——48——48——4147
12 48 48 48 4 156
1. If the MRC-12 card is initially populated with OC-3/12 on all its 12 ports, you can later add OC-48 SFPs on that card from top port to bottom port or from
bottom port to top port. The maximum available bandwidth usage is different for these two cases.
Table 4-20 Line Rate Configurations Per 15454_MRC-12 Port, Based on Available Bandwidth (continued)
MRC-12 Port
Number1234 567 8 9101112
Ports
Used
Total
STSs