Cisco Systems 15454 Switch User Manual


 
15-22
Cisco ONS 15454 Reference Manual, R7.0
78-17191-01
Chapter 15 Performance Monitoring
15.5 15.5.6 DS3i-N-12 Card Performance Monitoring Parameters
Figure 15-13 PM Read Points on the DS3i-N-12 Cards
Table 15-9 describes the PM parameters for the DS3i-N-12 card.
110717
ONS 15454
DS3i-N-12 Card
LIU
Mux/Demux ASIC
BTC
ASIC
XC Card(s)
OC-N
DS3 Side
Path
Level
SONET Side
CV-P
ES-P
FC-P
SES-P
UAS-P
CV-PFE
ES-PFE
FC-PFE
SES-PFE
UAS-PFE
DS3 CV-L
DS3 ES-L
DS3 SES-L
DS3 LOSS-L
DS3 AISS-P
DS3 CVP-P
DS3 ESP-P
DS3 SASP-P
DS3 SESP-P
DS3 UASP-P
DS3 CVCP-P
DS3 ESCP-P
DS3 SASCP-P
DS3 SESCP-P
DS3 UASCP-P
DS3 CVCP-PFE
DS3 ESCP-PFE
DS3 SASCP-PFE
DS3 SESCP-PFE
DS3 UASCP-PFE
PMs read on LIU
PMs read on Mux/Demux ASIC
Table 15-9 DS3i-N-12 Card PMs
Line (NE) Path (NE) STS Path (NE) Path (FE)
1
1. The C-Bit PMs (PMs that contain the text “CP-P”) are applicable only if the line format is C-Bit.
STS Path (FE)
CV-L
ES-L
SES-L
LOSS-L
AISSP-P
CVP-P
ESP-P
SASP-P
2
SESP-P
UASP-P
CVCP-P
ESCP-P
SASCP-P
3
SESCP-P
UASCP-P
2. DS3i-N-12 cards support SAS-P only on the Rx path.
3. The SASCP parameter is also displayed as "undefined" for near-end parameter though it is a far-end parameter.
CV-P
ES-P
SES-P
UAS-P
FC-P
CVCP-PFE
ESCP-PFE
SASCP-PFE
SESCP-PFE
UASCP-PFE
CV-PFE
ES-PFE
SES-PFE
UAS-PFE
FC-PFE