Filter
Top Products
15-42
Cisco ONS 15454 Reference Manual, R7.0
78-17191-01
Chapter 15 Performance Monitoring
15.7 15.7 Performance Monitoring for Optical Cards
15.7 Performance Monitoring for Optical Cards
This section lists PM parameters for ONS 15454 optical cards, including the OC-3, OC-12, OC-48, and
OC-192 cards. Figure 15-20 shows the signal types that support near-end and far-end PMs.
Figure 15-20 Monitored Signal Types for the OC-3 Cards
Note The XX in Figure 15-20 represents all PMs listed in Table 15-22, Table 15-23, and Table 15-24 with the
given prefix and/or suffix.
Figure 15-21 shows where overhead bytes detected on the ASICs produce PM parameters for the OC3
IR 4 SH 1310 and OC3 IR SH 1310-8 cards.
Figure 15-21 PM Read Points on the OC-3 Cards
Note For PM locations relating to protection switch counts, see the Telcordia GR-253-CORE document.
78985
ONS 15454
PTE
OC-3 OC48
Fiber
OC-3 Signal
OC-3 Signal
ONS 15454
OC-3OC48
STS Path (STS XX-P) PMs Near and Far End Supported
PTE
78986
ONS 15454
OC-3 Card
Pointer Processors
BTC
ASIC
XC Card(s)
OC-N
CV-S
ES-S
SES-S
SEFS-S
CV-L
ES-L
SES-L
UAS-L
FC-L
PPJC-Pdet
NPJC-Pdet
PPJC-Pgen
NPJC-Pgen
Path
Level
STS CV-P
STS ES-P
STS FC-P
STS SES-P
STS UAS-P
STS CV-PFE
STS ES-PFE
STS FC-PFE
STS SES-PFE
STS UAS-PFE
PMs read on BTC ASIC
PMs read on PMC