A-25
Cisco ONS 15454 Reference Manual, R7.0
78-17191-01
Appendix A Hardware Specifications
A.6 A.5.10 FILLER Card Specifications
A.5.10 FILLER Card Specifications
The FILLER cards have the following specifications:
• Environmental
–
Operating temperature:
C-Temp: -40 to +149 degree Fahrenheit (-40 to +65 degrees Celsius)
–
Operating humidity: 5 to 95 percent, noncondensing
• Dimensions
–
Height: 12.650 in. (321.3 mm)
–
Width: 0.716 in. (18.2 mm)
–
Depth: 9.000 in. (228.6 mm)
–
Card weight: 0.4 lb (0.19 kg)
A.6 Optical Card Specifications
This section provides specifications for the OC3 IR4/STM1 SH 1310 (four-port), OC3 IR/STM1 SH
1310-8 (eight-port), OC12 IR/STM4 SH 1310, OC12 LR/STM4 LH 1310, OC12 LR STM4 LH 1550,
OC12 IR/STM4 SH 1310-4 (four-port), OC48 IR 1310, OC48 LR 1550, OC48 IR/STM16 SH AS 1310,
OC48 LR/STM16 LH AS 1550, OC48 ELR 100 GHz, OC48 ELR 200 GHz, OC192 SR/STM64 IO 1310,
OC192 IR/STM64 SH 1550, OC192 LR/STM64 LH 1550, OC192 LR/STM64 LH ITU 15xx.xx,
15454_MRC-12 (12-port), OC192SR1/STM64IO Short Reach, and OC192/STM64 Any Reach cards.
For compliance information, refer to the Cisco Optical Transport Products Safety and Compliance
Information.
A.6.1 OC3 IR 4/STM1 SH 1310 Card Specifications
The OC3 IR 4/STM1 SH 1310 card has the following specifications:
• Line
–
Bit rate: 155.52 Mbps
–
Code: Scrambled non-return to zero (NRZ)
–
Fiber: 1310-nm single-mode
–
Loopback modes: Terminal and facility
–
Connector: SC
–
Compliance: Telcordia GR-253-CORE, ITU-T G.707, ITU-T G.957
• Transmitter
–
Maximum transmitter output power: –8 dBm
–
Minimum transmitter output power: –15 dBm
–
Center wavelength: 1274 to 1356 nm
–
Nominal wavelength: 1310 nm
–
Transmitter: Fabry Perot (FP) laser