5-8
Cisco ONS 15454 Reference Manual, R7.0
78-17191-01
Chapter 5 Ethernet Cards
5.4 5.3.4 Cross-Connect Compatibility
5.3.4 Cross-Connect Compatibility
The E100T-G card is compatible with the XCVT, XC10G and XC-VXC-10G cards.
5.4 E1000-2 Card
Note For hardware specifications, see the “A.7.3 E1000-2 Card Specifications” section on page A-44.
The ONS 15454 uses E1000-2 cards for Gigabit Ethernet (1000 Mbps). The E1000-2 card provides two
IEEE-compliant, 1000-Mbps ports for high-capacity customer LAN interconnections. Each port
supports full-duplex operation.
The E1000-2 card uses GBIC modular receptacles for the optical interfaces. For details, see the
“5.13 Ethernet Card GBICs and SFPs” section on page 5-31.
Figure 5-3 shows the card faceplate and a block diagram of the card.
Table 5-6 E100T-G Port-Level Indicators
LED State Description
Yellow (Active) Port is active (transmitting or receiving data). By default, indicates the
transmitter is active but can be software controlled to indicate link status,
duplex status, or receiver active.
Solid Green (Link) Link is established. By default, indicates the link for this port is up, but can
be software controlled to indicate duplex status, operating speed, or
collision.