Filter
Top Products
Chapter 3 Installing the Switch
Preparing for Installation
3-4
Catalyst 2984G, 2948G-GE-TX, and 2980G Switch Hardware Installation Guide
78-6286-05
Class A Notice for Hungary
Checking the Shipping Container
Do not discard the packing carton and other packing materials after you unpack
the switch. Flatten the packing carton and store it. You will need the packing
materials if you need to move or ship the switch in the future. Repacking
instructions are provided in Appendix B, “Repacking a Switch.”
Check the contents of the accessory kit against the accessories checklist and the
packing slip. Verify that you received all listed equipment.
Catalyst 2948G and 2980G Switches
The Catalyst 2948G and 2980G switches are shipped with these items:
• This hardware guide
• AC power cord
• RJ-45 to DB-9 cable
• DB-9 to RJ-45 cable
Warning
This equipment is a class A product and should be used and installed properly
according to the Hungarian EMC Class A requirements (MSZEN55022). Class A
equipment is designed for typical commercial establishments for which
special conditions of installation and protection distance are used.