Filter
Top Products
Chapter 4 Configuring the Gigabit Ethernet Ports
Connecting To an SFP Module
4-16
Catalyst 2984G, 2948G-GE-TX, and 2980G Switch Hardware Installation Guide
78-6286-05
Step 5 If necessary, reconfigure and restart the switch or target device.
The Gigabit Ethernet ports on these modules are used primarily for backbone
interconnection of other high-performance switches and routers.
After you have connected all the interfaces, check all connections, and then
perform the steps described in the “Verifying Switch Operation” section on
page 3-23 to verify that the switch is operational.