Filter
Top Products
3-11
Catalyst 2984G, 2948G-GE-TX, and 2980G Switch Hardware Installation Guide
78-6286-05
Chapter 3 Installing the Switch
Installing the Catalyst 2948G-GE-TX Switch
Figure 3-3 Removing Screws from the Catalyst 2948G-GE-TX Switch
Attaching Brackets to the Switch
The bracket orientation and the brackets you use depend on whether you are
attaching the brackets for a 19-inch or a 24-inch rack. For 19-inch racks, use the
brackets that are included in the mounting kit.
Note Installing the switch in a 24-inch rack requires an optional bracket kit not included
with the switch. You can order a kit containing the 24-inch rack-mounting
brackets and hardware (order part number RCKMNT-1RU=) from Cisco.
Figure 3-4 through Figure 3-9 show how to attach each type of bracket to one side
of the switch. Follow the same steps to attach the second bracket to the opposite
side of the switch.
98659