Cisco Systems 611 Network Hardware User Manual


 
1-11
Cisco Wide Area Application Engine 511 and 611 Hardware Installation Guide
OL-7220-02
Chapter 1 Introducing the Cisco Wide Area Application Engine
Hardware Features
Figure 1-9 WAE-511 and WAE-611 Back Panel Ports and Receptacles
Note Cisco ACNS and WAFS software do not support the use of a keyboard or mouse
(Personal System 2 [PS/2] or Universal Serial Bus [USB]). However, keyboard
and mouse are supported by the BIOS for power-on self-test (POST), and the
configuration/setup utility.
Table 1-5 describes the back panel ports and receptacles.
1 AC power receptacle 2 Mouse port
3 Keyboard port 4 Ethernet 1 receptacle
5 Ethernet 2 receptacle 6 USB ports (not supported)
7 Monitor port 8 Serial port
115773
1 2 3 4
8 7 5
6
Table 1-5 Back Panel Ports and Connectors
Item Description
AC power receptacle The AC power cord connects to this plug.
Ethernet 1 port This 10/100/1000BASE-T port is autosensing with
full-duplex capability; it connects your device to the
Ethernet LAN.
Ethernet 2 port This 10/100/1000BASE-T port is autosensing with
full-duplex capability; it connects your device to the
Ethernet LAN.
Serial port This is a standard serial port for connecting to a
console or terminal.