Filter
Top Products
3-7
Cisco Wide Area Application Engine 511 and 611 Hardware Installation Guide
OL-7220-02
Chapter 3 Installing the Cisco Wide Area Application Engine
Installing the Cisco Wide Area Application Engine
Note Ensure that the pins are fully extended through the mounting flange and slide
rail pin bracket. (See Figure 3-5.)
Figure 3-5 Attaching the Slide Rail to the Rear Mounting Flange—Left
Front Rail Shown
Step 4
To secure the front of the slide rail to the equipment rack, align the pins (labeled 1 in
Figure 3-6) on the front pin carriage to the front mounting flange. If you adjusted the
rail length, push the pin carriage back toward the rear of the slide rail. Press the latch
tab (labeled 2 in Figure 3-6) to release the front pin carriage.
Note Ensure that the pins are fully extended through the mounting flange and
the slide rail pin bracket (labeled 3 in Figure 3-6).
1 Release tab for the rail-adjustment
bracket
2 Latch tab
2
1
134404
Pins extended through
the mounting flange and
slide rail pin bracket
Pins not extended
through the mounting
flange and slide rail
pin bracket