Filter
Top Products
1-13
Cisco Wide Area Application Engine 511 and 611 Hardware Installation Guide
OL-7220-02
Chapter 1 Introducing the Cisco Wide Area Application Engine
Hardware Features
Figure 1-10 Ethernet Port Connector
Serial Port Connector
The WAE appliance has one standard serial port connector located on the back of
the device.
Figure 1-11 shows the pin number assignments for the 9-pin, male D-shell serial
port connector on the back of the device. These pin number assignments conform
to the industry standard.
Figure 1-11 Serial Port Connector
SCSI Port Connector
The WAE-611 has one SCSI LVD port connector located on the back of the
device. A cable for this port is provided when you purchase a Cisco
Storage Array.
When you attach an external SCSI device to the SCSI connector, you must set a
unique ID for the device. Refer to the information that comes with the device for
instructions on how to set its SCSI ID.
1
8
Link LED
(green)
Activity LED
(green)
83195
1
5
69
83193