Filter
Top Products
Appendix A Technical Specifications
Appliance Specifications
A-2
Cisco Wide Area Application Engine 511 and 611 Hardware Installation Guide
OL-7220-02
Table A-1 Appliance Features and Specifications
Specification Description
Microprocessor
• WAE-511—One Intel 2.8-GHz Celeron 256-KB with level 2 cache and
multimedia extensions (MMX2) technology
• WAE-611—One Intel 3.0-GHz Pentium 4800 MHz with level 2 cache
and multimedia extensions (MMX2) technology
Memory
• WAE-511—One or two 512-MB SDRAM DIMMs
(MEM-WAE-512MB=)
• WAE-611—Two 1-GB SDRAM DIMMs (fixed configuration)
Regardless of the the amount of memory installed on your hardware device,
the amount of memory supported is regulated by the software version that
is installed:
• WAFS software supports up to 1 GB of memory.
• ACNS software supports up to 512 MB of memory. ACNS software
does not support additional memory over 512 MB.
Expansion bays Two 3.5-in. (8.89-cm) slim-height bays for hard disk drives
Expansion slots Two 66-/100-MHz 64-bit PCI-X slots on the system board (half-length
full-height slots; one low profile and one full profile)
Hard disk controller
• WAE-511—Serial advanced technology attachment (SATA) controller
• WAE-611—Ultra320 SCSI controller
Adapters
• 1-port Fibre Channel adapter
• 1-port MPEG A/V decoder adapter
Note The WAE-511 and WAE-611 support either the Fibre Channel
adapter or the MPEG A/V decoder adapter in PCI slot 1.
• Ultra320 SCSI adapter installed in PCI slot 2 (WAE-611 only)
• 4-port Ethernet inline network adapter
Power supply 1 AC-input
Dimensions
• Height: 1.75 in., 1 RU (44 mm)
• Depth: 20 in. (508 mm)
• Width: 16.94 in. (430 mm)