Filter
Top Products
14
Attach the Cable-Management Bracket
Figure 9 Attaching the Cable-Management Bracket
Step 1 Align the cable-management bracket (1) to the rack-mount bracket on the left side of the Cisco 7401ASR router.
Step 2 Using a Phillips screwdriver and the
M4 x 20-mm screw (2), thread and tighten the screw to the cable-management
bracket.
Go to the “Four-Post Rack Installation” section on page 15 or the “Two-Post Rack Installation” section on page 16.
1
Cable-management bracket
2
M4 x 20-mm screw
57578
ENABLED
RX CELLS
RX CARRIER
RX ALARM
TX
RX
1
2