Filter
Top Products
5
5-6 Setting up the Fiery from a Windows Computer
Network Setup
Network Setup configures the Fiery to receive print jobs over the networks used at your
site. If the Fiery is configured to enable more than one protocol, it automatically
switches to the correct protocol when it receives a print job. When multiple ports are
enabled, print jobs can be received over all ports at the same time.
You can view and specify the following network settings in Network Setup:
• Adapters and ports— currently configured network adapters and port settings
• Protocols—including AppleTalk, IPX/SPX, and TCP/IP
• Print Services—including LPD printing (TCP/IP), NetWare printing (PServer),
Windows print sharing (SMB), HTTP support (WWW), Internet Printing Protocol
(IPP) printing, and Port 9100 printing
• E-mail Service— the Fiery E-mail Service