Filter
Top Products
4
4-25 Network Setup options
Bindery Setup menu
NOTE: If you change your mind about any of the menus you have selected, use the
Menu button to escape and return to the main Bindery Setup menu. To cancel all
changes, exit Network Setup and select No to Save Changes.
Because you can set up more than one Novell server to handle Fiery print jobs, an
additional menu is displayed for this purpose. The options are:
• Add File Server—creates a new file server connection to the Fiery. You can set up a
maximum of eight file server connections. After you have finished adding a new
server, you return to the Bindery Setup menu, where you can set up another server.
• View Server List—displays the list of file servers that have already been selected to
communicate with the Fiery.
• Edit Connection—lets you change the NetWare Print Server that will print to the
Fiery.
• Remove File Server—lets you disconnect the Fiery from a file server to which it is
currently connected. Remove a file server when you want to reduce the number of
connections to the Fiery or reassign the connection to a different NetWare
file
server.
• Exit Bindery Setup—lets you exit this menu after you have added all servers, viewed
a list of file servers, or removed a file server from the list.