Filter
Top Products
A
A-2 Troubleshooting
Frame Type selection
(Network Setup >Protocol
Setup >IPX/SPX Setup)
Enable NDS
(Network Setup > Service
Setup > PServer Setup > NDS
Setup)
Invalid frame size. The network hub is not connected to a Novell machine
when the Fiery tries to bind.
Warning! IPX network
number is zero.
No other IPX machine can be found on the network, or
the network hub is not connected to the network when the
Fiery tries to bind. When this occurs, the network number
defaults to zero.
No NDS trees found. No NDS trees were found on the Novell network. Check
to see that the frame types on the Fiery are
properly configured.
Select NDS Tree
(Network Setup > Service
Setup > PServer Setup >
NDS Setup)
Warning! Selecting a new
NDS tree deletes Bindery
setup.
You have previously connected the Fiery to a different
NDS tree. NetWise supports only a single NDS tree con-
nection. To avoid a potential conflict with an existing tree
connection (for example, if the connection was made
through a NetWare 4.x server in emulation mode), all
bindery settings will be deleted.
If you choose OK, and choose Yes in the following message
(Delete Bindery setup and continue?), bindery settings are
deleted and have to be re-entered in Bindery Setup.
To avoid deleting the bindery settings, select OK and
choose No in the following message (Delete Bindery setup
and continue?).
Repeat NDS Setup without changing the NDS tree, or exit
to Bindery Setup to review your current bindery settings.
Navigating NDS tree
(Network Setup > Service
Setup > PServer Setup >
NDS Setup)
___ is empty. The chosen container contains no sub-containers or objects
relevant to the current mode of navigation.
Bindery Setup
(Network Setup > Service
Setup > PServer Setup >
Bindery Setup)
If you also plan to use NDS,
set up NDS before Bindery.
No NDS settings are present. You are reminded to perform
NDS Setup before Bindery Setup in case your network
includes both NDS and bindery servers.
After this Setup screen This message Means