Filter
Top Products
7
7-2 Administering the Fiery
Setting passwords
You can set or change the Administrator password for the Fiery. Anyone with the
Administrator password can modify the Setup options, and control the flow and order
of print jobs with the job management tools.
When the Fiery is installed, there is no password. If you do not create an Administrator
password, users are not required to enter a password to modify the Setup or use the
administrator functions in the job management tools. If an Administrator password
has been set previously, you are required to enter it when you run Setup. Use the
and keys to select the characters and the ENTER key to advance and complete (see
“Types of Setup screens” on page 4-4).
Caution: If you decide to set an administrator password make sure you keep a
careful note of it. If you lose or forget this password it cannot be
recovered for you, and the internal hard disk drive containing the
operating system and all settings will need to be replaced.
Controlling the job flow Using Fiery WebTools, Command WorkStation and Fiery
utilities and for managing job priorities, tracking current
jobs, canceling jobs, printing jobs in the Hold queue, and
reprinting from the Printed or Hold queue
Printing Guide
Job Management Guide
Release Notes
Job accounting Viewing, printing, and exporting the Job Log, user notes
Setting automatic printing and clearing for the Job Log
Job Management Guide
Colour management Printing with CMYK simulations
Printing colour samples and swatch pages
Installing colour profiles
Colour Guide
User Software Installation
Guide
Maintaining optimal Fiery
performance
Tips
Deleting jobs, clearing queues
page 7-9, and
Job Management Guide
Troubleshooting
Troubleshooting Fiery Setup Appendix A
For these operations And these tasks See