Filter
Top Products
4
4-10 Performing Setup from the Control Panel
Parallel Port Setup options
You must enable the parallel port in order to enter the Parallel Port Setup options and
print to the parallel port.
Port Timeout in Seconds
5–60 [5]
This option appears only if Enable Parallel Port is set to Yes. Your setting determines
how long (in seconds) the Fiery waits without receiving data from the parallel port
before deciding that the current job is complete. Until the timeout, the Fiery cannot
receive new jobs through the parallel port, but it can continue to receive network print
jobs.
Ignore EOF Character
Yes/No [Yes]
This option appears only if Enable Parallel Port is set to Yes. This option specifies that
the Fiery should ignore end-of-file (EOF) messages in a file. This option must be set to
Yes to print PostScript files in binary format (not ASCII); under normal circumstances,
it should be set to No. When this option is set to Yes, the Fiery uses the parallel port
timeout value to determine when the end of the file has been reached. If you experi-
ence printing problems, set this option to No.
Admin Setup
Parallel Setup
Parallel Port Setup
Enable Parallel Port
Yes/No [No]
Select Yes if you want to print through the parallel port. You can connect a single
Windows computer to the parallel port and print directly to the Fiery.