Filter
Top Products
3
3-4 Preparing for Fiery Setup
WebTools
The Fiery supports Internet or intranet access with WebTools from Windows and
Mac OS computers. To enable the use of WebTools, you must do the following in
Setup:
• Enable TCP/IP.
• Set an IP address, subnet mask, and gateway address for the Fiery.
• Enable Web Services.
For more information, see Chapter 6.
You can set passwords to control access to WebTools features. If you do not specifically
set these passwords, all users have access to all WebTools functions (see page 3-3).
WebTools include Status, WebLink, WebDownloader, and WebSetup.
Status
The Status WebTool provides you with current information on the jobs processing and
printing on the Fiery. It is not affected by passwords. For more information, see
Chapter 8 of the Printing Guide.
WebLink
WebLink provides all users with a link to an address on the Internet. To change the
WebLink Internet address, see page 6-3. This function requires the Administrator
password, if one has been set (see “Passwords” on page 3-3).
NOTE: If you do not set the Administrator password, any user can change the WebLink
address, which affects all users. For this reason, we strongly recommend that you set an
Administrator password.
WebDownloader
WebDownloader allows you to print PostScript, EPS, PDF, and TIFF files directly to
the Fiery without first opening the file in an application. It is not affected
by
passwords.