Filter
Top Products
2
Chassis Installation Procedures for Cisco 2800 Series Routers
OL-5786-03
Installing Modules and Interface Cards
• Quick Start Guide: Network Modules for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700
Series Routers and Cisco 2800 Series
• Cisco Network Modules Hardware Installation Guide
For HWICs and VICs:
• Installing Interface Cards in Cisco 2800 Series Routers
• Quick Start Guide: Interface Cards for Cisco 1600, 1700, 2600, 3600, and 3700 Series ---and Cisco
2800 Series
• Cisco Interface Cards Installation Guide
The chassis slots for network modules and interface cards are identified in Figure 1, Figure 2, Figure 3,
and Figure 4.
If the required network modules, interface cards, and internal field-replaceable units (FRUs) are already
installed, proceed to the “Setting Up the Chassis” section on page 5.
If you need to remove or install any internal FRUs, see the “Installing Internal Field-Replaceable Units
(FRUs)” section on page 4.
Figure 1 Chassis Slot Locations in Cisco 2801 Routers
1 Slot 0 (VIC or VWIC, voice only—no PRI) 8 Auxiliary power (AUX/PWR) LED
2 Slot 1 (WIC, VIC, VWIC, or HWIC) 9 Universal serial bus (USB) port
3 Slot 2 (WIC, VIC, or VWIC) 10 AIM/PVDM LEDs
4 Slot 3 (WIC, VIC, VWIC, or HWIC) 11 Auxiliary port
5 Console port 12 CompactFlash (CF) LED
6 Fast Ethernet ports and LEDs 13 External CompactFlash memory card slot
7
System LEDs
14
Removable center card guides to allow
double-wide HWIC-D installation
95816
1234
5
6
7 9 11 12 13 14 14
8 10