Filter
Top Products
Chapter 8 Troubleshooting
Troubleshooting Tools
Cisco SCE 2000 4xGBE Installation and Configuration Guide
OL-7824-04 8-7
prompt.
Generating a File for Technical Support
In order for technical support to be most effective, the user should provide them with the
information contained in the system logs. Use the logger get support-file command to
generate a support file for the use of Cisco technical support staff.
To generate a log file for technical support:
From the SCE 2000# prompt, type logger get support-file filename and press
Enter.
The support information file is created using the specified filename, and the SCE 2000# prompt
appears. This operation may take some time.
Check the LEDs
The front panel LEDS are the most immediate problem-detection mechanism of the platform.
Refer to the following sections for information on SCE 2000 platform LEDS:
• Front Panel (on page 2-2)
• LEDs (on page 4-13)
• SCE 2000 Operational Status (on page 8-7)
SCE 2000 Operational Status
The following table lists the operational states of the SCE 2000. The Status LED on the SCE
2000 Front Panel reflects the current SCE 2000 operational status. The operational status can be
displayed using CLI command show system operation-status.
Table 8-2 SCE 2000 Operational States
SCE 2000
Operational
Status
Description Status LED State
Booting Initial state after reset Orange
Operational SCE 2000 becomes operational after completing the following
process:
• Boot is completed
• Power self-tests are completed without failure
• Platform configuration is applied
Flashing green