Filter
Top Products
Chapter 6 Cabling the Line Ports and Completing the Installation
Connecting the line ports to the network
Cisco SCE 2000 4xGBE Installation and Configuration Guide
6-6 OL-7824-04
Inline topologies require connecting both Receive and Transmit fibers to the SCE 2000. Cascade
ports always require both Receive and Transmit fibers to be connected.
The following diagram illustrates the connections for a dual link, two SCE 2000 inline topology
Figure 6-5: Cabling Diagram: Dual Link Inline Topology Two Cascaded SCE 2000s
Configuring the GBE Interface Parameters
By default, the SCE 2000 GBE line interface ports are configured with auto-negotiation disabled.
The procedure for enabling auto-negotiation for the GBE line interface ports is explained in the
following section.
Note
Auto-negotiation must be disabled when the SCE 2000 is deployed via an external optical splitter
(receive-only topology)
.
Note
If you change any parameters, you must save the new configuration settings.
Type copy running-config startup-config, and press Enter