Filter
Top Products
4-4
Administration Guide for Cisco Virtualization Experience Client 6215 Firmware Release 8.6
Chapter 4 Accessing Applications with the Application Browser
Configuring the Cisco VXC Manager Agent
Figure 4-4 Export Logs to Remote Server Dialog Box
Note Permanent and temporary registry logs are exported by default.
Configuring the Cisco VXC Manager Agent
Click Cisco VXC-M in the Application Browser to open the Cisco VXC-M Agent Configuration dialog
box. Use this dialog box to configure the Cisco VXC Manager server location.
Tip After you configure the Cisco VXC Manager Agent properties, Cisco recommends that you reboot the
thin client.
Figure 4-5 VXC Manager Agent Configuration Dialog Box
To configure the Cisco VXC Manager server location, perform the following procedure:
Procedure
Step 1 Enter the VXC-M Server IP address.
Step 2 Enter the Client to Server Port (default is 80).
Step 3 Enter the Secure Port (HTTPS port default is 443).
Step 4 Click OK.
After you reboot the thin client, the thin client performs a checkin with the Cisco VXC Manager.