Filter
Top Products
3-9
Cisco H.323 Signaling Interface User Guide
OL-4806-01 Rev. A14
Chapter 3 Provisioning the Cisco HSI
Cisco HSI Configuration
OVLDLEVEL1PERCENT Indicates what percentage of calls should be rejected when an
overload condition occurs. This parameter is used in conjunction with
the OVLDLEVEL1FILTER parameter. The overload level 1 value is
the lowest level of overload and must be less than or equal to the
provisioned values for OVLDLEVEL2PERCENT and
OVLDLEVEL3PERCENT.
Note If this value is set to zero, no overload level 1 treatment
occurs.
20
OVLDLEVEL1FILTER Indicates what call types should be gapped if an overload level 1
condition occurs. The possible values are:
• Normal—Emergency or priority calls are not gapped.
• All—All calls are gapped, regardless of type.
Note If the overload percentage is set to 100, all calls are gapped
irrespective of this setting.
Normal
OVLDLEVEL1THRESHLOWER
CALLS
Determines the number of active calls below which the application
load must fall in order to remove the overload level
1 condition.
1800
OVLDLEVEL1THRESHUPPER
CALLS
Determines how many simultaneous active calls trigger an overload
level 1 condition.
1900
OVLDLEVEL1THRESHLOWER
CPU
Determines the CPU utilization level below which the application
must fall in order to remove the overload level 1 condition.
60
OVLDLEVEL1THRESHUPPER
CPU
Determines the level of CPU utilization that triggers an overload
level
1 condition.
65
OVLDLEVEL2PERCENT Indicates what percentage of calls should be rejected when an
overload condition occurs. The parameter is used in conjunction with
the OVLDLEVEL2FILTER parameter. This is the second level of
overload and must be less than or equal to the provisioned value of
OVLDLEVEL3PERCENT and greater than or equal to the
provisioned value of OVLDLEVEL1PERCENT.
Note If this value is set to zero, no overload level 1 or 2 treatment
occurs (by definition, the level 1 value must also be zero).
75
OVLDLEVEL2FILTER Indicates what call types should be gapped if an overload level 2
condition occurs (see OVLDLEVEL1FILTER).
Normal
OVLDLEVEL2THRESHLOWER
CALLS
Determines the number of active calls below which the application
load must fall in order for the overload level 2 condition to be
removed.
2000
OVLDLEVEL2THRESHUPPER
CALLS
Determines how many simultaneous active calls trigger an overload
level 2 condition.
2200
OVLDLEVEL2THRESHLOWER
CPU
Determines the level of CPU utilization below which the application
must fall in order for the overload level 2 condition to be removed.
70
OVLDLEVEL2THRESHUPPER
CPU
Determines the level of CPU utilization that triggers an overload
level
2 condition.
80
Table 3-4 Dynamic System Data Parameters (continued)
Parameter Description Default