Filter
Top Products
3-11
Cisco H.323 Signaling Interface User Guide
OL-4806-01 Rev. A14
Chapter 3 Provisioning the Cisco HSI
H.323 Stack Configuration
Nonprovisionable Data
The parameters in Table 3-5 cannot be altered through MML commands.
MML Provisionable Data
H.323 System Parameters
The parameters in Table 3-6 are required for H.323 stack initialization. To modify the parameters in
Table 3-6, use the h323_sys MML name variable for the prov-add, prov-dlt, and prov-ed commands.
Stop and restart the application for these changes to take effect.
Note The asterisk (*) after a parameter name in the first column of Table 3-6 denotes a mandatory RADVision
parameter that has an inbuilt default value if a value is not set in provisioning.
Q.931 Parameters
To modify the parameters listed in Table 3-7, use the q931 MML name variable for the prov-add,
prov-dlt, and prov-ed commands.
In the following example, the prov-add command sets the Q.931 parameter maxCalls to the value 2000.
Table 3-5 Nonprovisionable Data Parameters
H323_SYS Description
system.manualstart Present
system.pdlname Absent
system.delimiter #FF
ras.gatekeeper Absent
ras.rasmulticastaddress 224.0.1.41.1718
h245.capabilities.manualoperation Present
h245.masterslave.manualoperation Present
q931.manualaccept Present
q931.earlyH245 Present
q931.autoanswer Present
q931.manualcallprocessing Present
q931.h245tunneling Present
Table 3-6 H.323 System Initialization Parameters
Parameter Description Typ e Example
maxCalls* Maximum number of concurrent calls allowed INTEGER(0, 65535) 2500
maxChannels* Maximum number of concurrent channels allowed INTEGER(0, 65535) 2