Filter
Top Products
3-15
Cisco H.323 Signaling Interface User Guide
OL-4806-01 Rev. A14
Chapter 3 Provisioning the Cisco HSI
H.323 Stack Configuration
H.245 Parameters
To modify the H.245 parameters listed in Table 3-9, use the h245 MML name variable for the prov-add,
prov-dlt and prov-ed commands.
In the following example, the prov-add command sets the H.245 parameter masterSlave.timeout to the
value 5.
Example
prov-add:name=h245,masterSlave.timeout=5
The Update Type column in Table 3-9 shows when a change to an H.245 parameter takes effect after it
is modified:
• Immediate means that the effect of the change is immediate.
• Start means that the application needs to be restarted for the change to take effect.
• Next Call means that the next call has the new parameter set.
Note Immediate and Next Call update types are dynamic system data.
manualDiscovery.port The port associated with the
manualDiscovery.ipAddress,
which can, by agreement, be
either a well-known port or
another port.
INTEGER(0, 65535) 1719 Start
gateway.prefix[i] The gateway registers the
telephone prefix specified by
this parameter to indicate
that it is able to terminate it.
STRING 0208 Immediate
gatekeeperId Identifies the gatekeeper
with which the endpoint is
trying to register.
STRING OuterLondon Immediate
terminalAlias[i].e164 Two variants of the same
address for the endpoint;
e164 is numeric and h323ID
is text.
STRING 0208001000 Immediate
terminalAlias[i].h323ID STRING GW@ot.com.au Immediate
endpointVendor.t35CountryCode These parameters identify
the manufacturer of the
endpoint.
INTEGER(0, 255) 11 Immediate
endpointVendor.t35Extension INTEGER(0, 255) 11 Immediate
endpointVendor.manufacturerCode INTEGER(0, 65535) 9 Immediate
endpointVendor.productId Data that the manufacturer
assigns to each product.
STRING H323ESP Immediate
endpointVendor.versionId Data that the manufacturer
assigns to each version.
STRING R0.2.4 Immediate
Table 3-8 RAS Parameters (continued)
Parameter Name Description Type Example Update Type