Filter
Top Products
PurposeCommand
Displays whether vPC is enabled or not.switch# show feature
Displays how many EtherChannels are configured
and how many are still available on the switch.
switch# show port-channel capacity
Displays running configuration information for vPCs.switch# show running-config vpc
Displays brief information on the vPCs.switch# show vpc brief
Displays the status of those parameters that must be
consistent across all vPC interfaces.
switch# show vpc consistency-parameters
Displays information on the peer-keepalive messages.switch# show vpc peer-keepalive
Displays the peer status, the role of the local switch,
the vPC system MAC address and system priority,
and the MAC address and priority for the local vPC
switch.
switch# show vpc role
Displays statistics on the vPCs.
This command displays the vPC statistics
only for the vPC peer device that you are
working on.
Note
switch# show vpc statistics
For information about the switch output, see the Command Reference for your Cisco Nexus Series switch.
Viewing The Graceful Type-1 Check Status
This example shows how to display the current status of the graceful Type-1 consistency check:
switch# show vpc brief
Legend:
(*) - local vPC is down, forwarding via vPC peer-link
vPC domain id : 10
Peer status : peer adjacency formed ok
vPC keep-alive status : peer is alive
Configuration consistency status: success
Per-vlan consistency status : success
Type-2 consistency status : success
vPC role : secondary
Number of vPCs configured : 34
Peer Gateway : Disabled
Dual-active excluded VLANs : -
Graceful Consistency Check : Enabled
vPC Peer-link status
---------------------------------------------------------------------
id Port Status Active vlans
-- ---- ------ --------------------------------------------------
1 Po1 up 1
Cisco Nexus 5000 Series NX-OS Interfaces Configuration Guide, Release 5.2(1)N1(1)
96 78-26881-OL
Configuring Virtual Port Channels
Viewing The Graceful Type-1 Check Status