Filter
Top Products
PurposeCommand or Action
(Optional)
Saves the change persistently through reboots
and restarts by copying the running
configuration to the startup configuration.
copy running-config startup-config
Example:
switch(config-if)# copy running-config
startup-config
Step 6
The following example disables LACP graceful convergence on a port channel:
switch# configure terminal
switch(config) # interface port-channel 1
switch(config-if) # shutdown
switch(config-if) # no lacp graceful-convergence
switch(config-if) # no shutdown
switch(config-if) #
Reenabling LACP Graceful Convergence
Before You Begin
• Enable the LACP feature.
• Confirm that the port channel is in the administratively down state.
• Ensure that you are in the correct VDC. To switch to the correct VDC, enter the switchto vdc command.
Procedure
PurposeCommand or Action
Enters global configuration mode.configure terminal
Example:
switch# configure terminal
switch(config)#
Step 1
Specifies the port channel interface to
configure, and enters interface configuration
mode.
interface port-channel number
Example:
switch(config)# interface port-channel
1
switch(config) #
Step 2
Administratively shuts down the port channel.shutdown
Example:
switch(config-if)# shutdown
switch(config-if) #
Step 3
Cisco Nexus 5000 Series NX-OS Interfaces Configuration Guide, Release 5.2(1)N1(1)
62 78-26881-OL
Configuring Port Channels
Reenabling LACP Graceful Convergence