Filter
Top Products
1-25
Cisco EnergyWise Configuration Guide
OL-19806-03
Chapter 1 Managing Single Entities
Disabling EnergyWise
Disabling EnergyWise
Ta b l e 1-4 EnergyWise Commands
Command Mode Purpose
clear energywise neighbors Privileged EXEC Deletes the discovered neighbors and end points running
agents or clients from the EnergyWise neighbor table. The
switch immediately rediscovers them.
no energywise Interface configuration Disables EnergyWise on the PoE port or on the end point.
no energywise activitycheck Interface configuration Configures the switch to not wait until a Cisco IP phone
connected to a PoE port is not sending or receiving traffic
before the switch powers off the port.
no energywise allow query save
no energywise allow query set
Global configuration Configures the switch to not respond to a query that saves the
running configuration.
Configures the switch to not respond to a query that changes
the power level or the EnergyWise attributes.
no energywise allow query set Interface configuration Configures the interface to not respond to a query that
changes the power level or the EnergyWise attributes.
no energywise domain Global configuration Disables EnergyWise on the domain member.
no energywise endpoint Global configuration Configures the switch to not establish parent-child
relationships with connected EnergyWise-compatible end
points. The end points cannot receive queries or messages
from the switch.
no energywise [importance |
keywords [word,word,... ] | level
| name [name] | role [role]]
Interface configuration Removes the EnergyWise configuration on a switch port.
If you enter the no energywise level command, the switch
does not immediately change the power level to the default.
The power level changes when the switch restarts or you
enter the energywise level level command.
no energywise {importance |
keywords [word,word,...] | name
| neighbor [hostname |
ip-address] udp-port-number |
role}
Global configuration Removes the EnergyWise configuration on the entity.
no energywise level level
recurrence importance
importance {at minute hour
day_of_month month
day_of_week | timerange
timerange-name}
Interface configuration Removes the recurring event configuration on a switch port.
no energywise management Global configuration Configures the switch to not communicate with a connected
management station that sends queries.