Filter
Top Products
3-7
Cisco EnergyWise Configuration Guide
OL-19806-03
Chapter 3 EnergyWise CLI Commands
energywise (global configuration)
Examples This example shows how to enable EnergyWise, assign an IP phone to a domain, and set the domain and
management passwords.
Switch# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)# eenergywise domain cisco security shared-secret cisco protocol udp port
43440 ip 2.2.4.30
Switch(config)# energywise importance 50
Switch(config)# energywise keywords lab1,devlab
Switch(config)# service password-encryption
Switch(config)# energywise management security shared-secret 7 cisco port 60500
Switch(config)# energywise name Entity01
Switch(config)# energywise neighbor member-21 43440
Switch(config)# energywise role role.labaccess
Switch(config)# energywise allow query save
Switch(config)# end
Related Commands Command Description
show energywise Displays the EnergyWise settings and status.
show energywise domain Displays the domain to which the entity belongs.
show energywise recurrences Displays the recurring-event settings and status.