Filter
Top Products
3-6
Cisco EnergyWise Configuration Guide
OL-19806-03
Chapter 3 EnergyWise CLI Commands
energywise (global configuration)
Neighbors are not assigned.
The role is the model number.
Command Modes Privileged EXEC
Command History
Usage Guidelines When you add a switch to a domain, EnergyWise is enabled on the switch and its PoE ports.
When setting a hidden (encrypted) password, enter the service password-encryption global
configuration command before entering the energywise management security shared-secret 7
mgmt-password [port tcp-port-number] global configuration command.
If you enter the no energywise level command, the switch does not immediately change the power level
to the default. The power level changes when the switch restarts or when you enter the energywise level
level command.
Release Modification
12.2(50)SE This command was introduced on the Catalyst 3750-E, 3750, 3560-E, 3560, and 2960
switches.
12.2(52)SE On the Catalyst 3750-E, 3750, 3560-E, 3560, and 2960 switches
• The management udp-port-number keywords were replaced with the
management security shared-secret [0 | 7] shared-secret port tcp-port-number
keywords.
• The allow query {save | set} keywords were added.
12.2(52)SG This command was introduced on Catalyst 4500 switches.
12.2(54)SG On Catalyst 4500 switches
• The management udp-port-number keywords were replaced with the
management security shared-secret [0 | 7] shared-secret port tcp-port-number
keywords.
• The allow query {save | set} keywords were added.
12.2(33)SXI4 This command was introduced on the Catalyst 6500 switches. See the Cisco IOS
Release Notes for Cisco EnergyWise, EnergyWise Phase 2 for the specific devices.
15.0(1)M2 This command was introduced on Cisco Integrated Service Routers Generation 2
(ISR
G2), including Cisco 3900, 2900, and 1900 ISRs.