Filter
Top Products
2-5
Cisco EnergyWise Configuration Guide
OL-19806-03
Chapter 2 Managing Multiple Entities
Examples
Examples
• Querying with the Name Attribute, page 2-6
• Querying with Keywords, page 2-6
• Querying to Set Power Levels, page 2-6
• Setting the Time-Out Value, page 2-7
In these examples, Switch 1 and Switch 2 are in the same domain. The entity called shipping.1 is a PoE
port on Switch 1, and the entity called shipping.2 is a PoE port on Switch 2.
Step 2
energywise query importance importance
{keywords word,word,... | name name} set level
level [timeout timeout]
(Optional) Runs a query to power on or off the domain members,
PoE ports, or end points.
Caution Use this query with care. It affects both the entity on
which you enter the command and other domain
entities that match the query criteria.
• importance importance—Filters the results based on the
importance value. Only entities with values less than or equal
to the specified value appear. The importance range is from
1 to 100.
• (Optional) keywords word,word,...—Filters the results based
on one or more keywords.
• (Optional) name name—Filters the results based on the
name. For the wildcard, use * or name* with the asterisk at
the end of the name phrase.
• set level level—Sets the power level of the entities or PoE
ports. The range is from 0 to 10.
• (Optional) timeout timeout—Sets the time in seconds that
the management station waits for query results.
The default is 6 seconds. The range is from 1 to 180.
Repeat this step to run another query.
Command Purpose