Filter
Top Products
iDP3310 User's Manual
9 CITIZEN
4. OPERATION
4.1 Connecting AC Adapter
(1) Turn off the power switch.
(2) Put the cable connector of the AC adapter into the power connector on the rear side of the printer.
(3) Put the AC Power Supply Cord into the outlet.
CAUTION
:
•
Do not use a power supply unit other than the specified.
•
When unplugging the AC Power Supply Cord, be sure to hold the plug. Pulling the AC
Power Supply Cord could damage it, resulting in fire, electric shock, or wire breakage.
•
Unplug the AC Power Supply Cord from the plug socket and do not use the equipment
during a thunderstorm. A lightening strike might cause fire or electric shock.
•
Do not put the AC Power Supply Cord cord near a heating device. The coating of the
power cord may be melted, resulting in fire or electric shock.
•
If the equipment will not be used for a long time, be sure to unplug the AC Power
Supply Cord from the plug socket, for safety.
•
Make sure to use the power outlet for this power supply unit separated from the one
used for the other equipment creates noise.
•
Do not use the accessory AC Adapter for other devices or applications.