Filter
Top Products
iDP3310 User's Manual
31 CITIZEN
8. DRAWER KICK-OUT CONNECTOR AND POWER CONNECTOR
8.1 Specifications of Drawer Kick-Out Connector(Option)
(1) Drawer kick-out drive signal
The pulses specified by the BELL command(07h) are output.(Approx. 200 ms)
(2) Electrical characteristics
1) Drive voltage: 12V DC
+
/
−
1V
2) Drive current: 0.8 A at maximum
8.1.1 Connector’s Pin Configuration
No. Signal Function
1 FG Frame Ground
2 DRAWER 1 Drawer drive signal
3- -
4 VDR Drawer drive power
5- -
6- -
Connector used : TM5RJ3-66(HIROSE) or equivalent
Applicable connector : TM3P-66P(HIROSE) or equivalent
CAUTION
:
•
No output is made while printing.
•
A solenoid used for the drawer should be of 15
Ω
or more. An output current should
be kept below 0.8 A. Otherwise, there is a danger of trouble or burnout.
•
This connector cannot be connected to a telephone line. Do not connect other than the
solenoid.
8.1.2 Drive Circuit
[Printer Side]