Filter
Top Products
iDP3310 User's Manual
19 CITIZEN
5.2 DIP Switch Setting
1) DS1
DS1 Function ON OFF Factory Setting
DS1-1 Unused OFF
DS1-2 Mode change P200/250 iDP562 ON
DS1-3 Print density OFF
DS1-4 Print density * See the table below. ON
DS1-5 CR switching Ignored LF activated ON
DS1-6 DC2 cord Disable Enable OFF
DS1-7 Reprint ON
DS1-8 Reprint * See the table below. ON
2) DS2
DS2 Function ON OFF Factory Setting
DS2-1 Bit length 8 bits 7 buts ON
DS2-2 Parity Not provided Provided ON
DS2-3 Odd/even Odd Even OFF
DS2-4 Unused OFF
DS2-5 BAUD RATE ON
DS2-6 BAUD RATE ON
DS2-7 BAUD RATE
* See the table below.
OFF
DS2-8 Unused OFF
❒
DS2 is available only for serial interfaces.
Print Density Light Standard Dark Darker
DS1-3 OFF OFF ON ON
DS1-4 OFF ON OFF ON
Reprint Mode Command Reprint 1 Command Reprint 2 Reprint Normal print
DS1-7 OFF OFF ON ON
DS1-8 OFF ON OFF ON
❒
See the Page 20, 5.3 Repeat Print Setting.
BAUD RATE 150 300 600 1200 2400 4800 9600 19200
DS2-5 OFF OFF OFF OFF ON ON ON ON
DS2-6 OFF OFF ON ON OFF OFF ON ON
DS2-7 OFF ON OFF ON OFF ON OFF ON