Filter
Top Products
iDP3310 User's Manual
50 CITIZEN
ESC Y
ALL
[Function] Specify Repeat Print
[Code] <1B>H<59>H
[Outline] If this command is executed, the contents of the buffer will be printed according to the repeat
print mode set with the DIP switches. The buffer is cleared after reprinting.
•
Repeat print mode (DSW1-7: ON, DSW1-8: OFF)
If the command is received after printing, the data will be reprinted.
•
Command/switch repeat print mode 2 (DSW1-7: OFF, DSW1-8: ON)
If the command is received, the data will all be printed, and 2 seconds later, it will be
reprinted. If this command is not received, the data will not be reprinted.
•
Command/switch repeat print mode 1 (DSW1-7, DSW1-8: OFF)
If the command is received, the data will all be printed, and 10 seconds later, it will be
reprinted. If this command is not received, the data will not be reprinted.
[Caution] If the data exceeds 1KB, this command will reprint the preceding 1KB data.
If this command is not received during printing, it will be ignored. This command is ignored
in the normal print mode (DSW1-7, DSW1-8: ON) The
DC3 (<13>H) command assumes the same operation.
[See Also] Pages 20, 5.3 Repeat Print Setting