Filter
Top Products
inserted.
Ensure that the PC Card is
inserted in the correct
orientation. Insert the card gently
to prevent damage to the pins.
Speakers are turned
off or volume is
turned down.
Adjust the volume control on the
computer.
PC Card or card
driver is not PCMCIA
compliant.
Contact your Compaq authorized
dealer, reseller, or service
provider for a list of PC Cards
tested successfully in Compaq PC
Card platforms.
Computer beeps only
once when a PC Card is
inserted.
The computer beeps
once to indicate that
a PC Card is
recognized but not
properly configured.
Before a new PC Card can be
used, it may be necessary to
perform an initial setup
procedure. Follow the PC Card
manufacturer's instructions for
formatting a hard drive card or
installing PC Card-specific drivers
for a network card.
Network PC Card does
not work.
Necessary drivers
are not installed
(turned on).
Refer to the instructions that
came with the PC Card or contact
the vendor for information on
installing the correct drivers.
PC Card is not fully
inserted or is upside
down.
Ensure the PC Card is inserted
correctly.
Network PC Card or
driver is not PCMCIA
compliant.
Contact your Compaq authorized
dealer, reseller, or service
provider for a list of PC Cards
tested successfully in Compaq PC
Card platforms.
Storage PC Card does
not work.
SRAM and flash
memory PC Cards
require the memory
card driver to be
loaded.
Memory cards can only be
accessed using DOS real mode
drivers.
You are trying to
access the storage
PC Card using the
wrong drive letter.
If you are running Windows
95, change the drive letter
assignment in Device
Manager.
●
If you are running Windows
NT 4.0, change the drive
letter assignment through
the Control Panel.
●