Filter
Top Products
4-12 Using Battery Packs
Writer: Lorise Fazio Saved by: J Abercrombie Saved date: 12/08/98 4:03 PM
Part Number: 310296-002 File name: Ch04.doc
Beeps with a Blinking Power/Suspend Light
When the computer beeps while the power/suspend light is
blinking, the computer has initiated Suspend. See Chapter 5 for
more information on using Suspend.
NOTE:
When the computer is in Suspend and a low battery
condition occurs, pressing the power button or suspend button will
NOT exit Suspend. Connect the computer to AC power until a
fully charged battery is available.
If you prefer not to be alerted with system beeps, see “Turning
Beeps On or Off” in this chapter.
Turning Beeps On or Off
Based on the type of beeps you want to turn on or off, do one of
the following:
■
To enable or disable PC Card beeps, click Control Panel
Æ
double-click PC Card iconÆGlobal Settings tab, then click to
check or uncheck the Disable PC Card Sound Effects box.
■
To toggle all system beeps on or off, use the Computer Setup
Utility. The following beeps are affected (see Chapter 15 for
more information on using Computer Setup):
❏
Low battery warning beeps
❏
Power-On Self-Test (POST) beeps
❏
Suspend beeps
■
To disable only low battery warning beeps, click Start Æ
Settings Æ Control Panel Æ double-click Power Æ Power
Properties Æ Conservation Settings tab. Then click the
Warning Beeps Off button.
NOTE:
Application-specific beeps must be controlled through the
application software.