Filter
Top Products
8-4 Connecting External Devices
Writer: Lorise Fazio Saved by: J Abercrombie Saved date: 12/08/98 4:11 PM
Part Number: 310296-002 File name: Ch08.doc
Connecting Infrared Equipment
NOTE:
Infrared-equipped computers are IrDA-compliant. Infrared
performance may vary depending on performance of infrared
peripherals, distance between infrared devices, and applications
used. The infrared port is available only on specific models.
The infrared port allows wireless communication between your
computer and other infrared-equipped devices. Operating system
support for infrared communication is currently available with
Microsoft Windows 95. However, Microsoft Windows NT
Workstation support for infrared communication is not available.
The infrared port produces an invisible beam of infrared light to
communicate with another infrared-equipped device.
To establish an infrared link:
■
Be sure the infrared ports on both computers are turned on and
facing each other at a distance no greater than 1.5 feet (about
0.5 meter).
■
Avoid moving the infrared ports away from each other during
data transmission.
■
Avoid interference from remote control units, such as wireless
headphones or audio devices, pointed at the infrared ports.
■
Avoid direct sunlight, fluorescent light, or flashing
incandescent light close to the infrared ports.
■
Keep the path between the infrared ports free of any objects
that might interfere with data transmission.
■
Do not point one of the ports more than 30 degrees (plus or
minus 15 degrees off the center line) away from the infrared
port of the device you are connecting with.