Compaq 5525B Printer User Manual


 
Chapter 4 EMULATION
82
Slashed Zero
This parameter allows you to print the numeral “0” with or without the
slash. This option applies to all character sets except OCR-A and
OCR-B.
Disable. Zero is printed without a slash.
Enable. Zero is printed with a slash.
Page Format
Margins
Left Margin. Set in columns. Column zero is defined as the far left
edge of the page, and column numbering increments from left to
right.
Right Margin. Set in columns. Column zero is defined as the far
right edge of the page, and column numbering increments from
right to left.
Bottom Margin. Defined in lines, starting from line zero at the
bottom of the page and incrementing from the bottom up.
Perforation Skip
Disable. Allows printing on page perforation.
You may set up a skip-over margin of 1/2 inch, 2/3 inch, 5/6 inch, or
1 inch. For example, a skip-over margin of 1 inch allows a 1 inch
margin at the bottom of the page.
Forms Length
Forms length is the number of lines that can be printed on a page. You
can set forms length in inches, millimeters (mm), or as a function of the
current LPI (lines per inch).
Forms Width
The forms width can be specified in inches, millimeters, or as a function
of the current CPI (characters per inch). The forms width set should not
exceed the actual paper width.