Filter
Top Products
Visual Manager User Interface
StorageWorks by Compaq Network Storage Router M2402 User Guide 4-15
COMPAQ CONFIDENTIAL
Writer: Kim L. Miller File Name: e-ch4 Visual Manager User Interface.doc
Codename: Part Number: 269782-001 Last Saved On: 2/22/02 4:14 PM
The community name in the SNMP packet must match this community name for
the SNMP GET request to be successfully completed. Configure the SNMP
manager to have the same GET and SET community names as the router.
• Community Name – SET—(default: private) is only applicable for the FA MIB
2.2. See Appendix D “SNMP Management Information Bases” for more
information.
• Traps—enables or disables SNMP traps for manager IP addresses.
If Traps are enabled, up to three Trap Manager IP addresses can be setup.
Trapped events are logged in an event log. Event logging captures up to the last
215 events and then starts overwriting the log.
NOTE: To ensure accurate event logging, verify the clock and date are correctly set in
the Real-Time Clock screen.
• Trap Manager IP Address—is the address used for sending Trap notifications.
Typically, this is the IP address of the machine using the network management
application or MIB browser.
• Trap Manager Filter Setting—sets filtering of event notifications (described in
Appendix D, “SNMP Management Information Bases”).
Event notifications correspond to the trace setting levels configured in the Trace
Settings Configuration menu. The filters that can be set include:
— Log All Events (Priority 0)
— Disable Event Logging (Priority 1)
— Error Events (Priority 6)
— Notify Events (Priority 4)
• Trap Manager Row State—is set to an integer in the range of 0 through 3.
Options include:
— Disabled (0)—clears to the default settings
— No Traps (1)—no traps exist
— Row Exist (2)—row exists but traps are not sent to target.
— Send Traps (3)—row exists and traps are sent.