Visual Manager User Interface
4-40 StorageWorks by Compaq Network Storage Router M2402 User Guide
COMPAQ CONFIDENTIAL
Writer: Kim L. Miller File Name: e-ch4 Visual Manager User Interface.doc
Codename: Part Number: 269782-001 Last Saved On: 2/22/02 4:14 PM
To view or change map settings of a specific module:
1. Select one of the module and port/bus from the menu bar on the left side of the
screen or from the router image at the top of the screen.
2. After a Fibre Channel port or SCSI bus has been selected, specific mapping
information is displayed, including the name of the port, the selected host, and
the assigned map.
3. To make changes to the configuration, enter the new value and then click
Submit.
Because many mapping configuration settings are common to Fibre Channel and
SCSI maps, this section is subdivided as follows:
• Fibre Channel and SCSI Common Mapping Tasks
• Fibre Channel Mapping Tasks
• SCSI Mapping Tasks
Fibre Channel and SCSI Common Mapping Tasks
The following action options are available for Fibre Channel and SCSI maps:
• Add Host—adds a new host.
To add an undefined host, type the hostname in the Add Host field and then click
Add.
• Add Map—adds a new map.
To add an undefined map, type the name of the map in the Add Map field and
then click Add.
• Select Host—adds a known host.
To select a previously set up host, expand the Select Host drop-down box and
select the host from the list.
• Select Map—adds a known map.
To select a previously set up map, expand the Select Map drop-down box and
select the map from this list.