Filter
Top Products
Visual Manager User Interface
StorageWorks by Compaq Network Storage Router M2402 User Guide 4-47
COMPAQ CONFIDENTIAL
Writer: Kim L. Miller File Name: e-ch4 Visual Manager User Interface.doc
Codename: Part Number: 269782-001 Last Saved On: 2/22/02 4:14 PM
Viewing and Changing SCSI Map Information
To view or change current SCSI map host information:
1. In the Mapping Menu screen, select the desired SCSI module and bus.
2. Click Edit/View in the Map section of the screen.
The SCSI Map dialog box is displayed. Current map information is shown at the
top of the dialog box.
3. Enter the new settings and then click the appropriate action button.
Figure 4-30 is an example of the SCSI Map dialog box.
Figure 4-30: SCSI Map dialog box
NOTE: To map Fibre Channel devices to any SCSI initiator on the selected bus, a Target ID
must be enabled from the SCSI Bus Configuration Menu. A Target ID should only be added if
there is a SCSI initiator that needs to address Fibre Channel devices. Each Target ID can be
used to store up to 32 Fibre Channel devices.