Filter
Top Products
Visual Manager User Interface
4-6 StorageWorks by Compaq Network Storage Router M2402 User Guide
COMPAQ CONFIDENTIAL
Writer: Kim L. Miller File Name: e-ch4 Visual Manager User Interface.doc
Codename: Part Number: 269782-001 Last Saved On: 2/22/02 4:14 PM
Home page information includes:
• The Compaq logo is located in the upper left corner of the page. Figure 4-2 is an
example of this portion of the home page screen. If the Internet is accessible to
the host, click the Compaq logo to open the router company Web site.
Figure 4-2: Compaq logo
• A back-side view of the router is located near the top of the home page.
Figure 4-3 is an example of this portion of the home page screen.
Figure 4-3: Back-side router image
The router image is interactive, allowing quick access to configuration menus:
— To display current settings and status for a module, click the corresponding
module shown in the router image.
— To open a menu for making changes to the configuration for that particular
port or bus, click the desired Fibre Channel port or SCSI bus.
— To open the Power Supply Configuration menu, click the power connector
image.
— To open the Network Configuration menu, click the Ethernet port.
— To open the Beacon settings menu, click the System Status LED indicator.
• Router status information is located in the body of the home page and includes:
— Platform information
— Temperature measurements
The home page monitors the temperature of the router, checking once every
60 seconds. If the detected temperature is outside the operating range, a
pop-up notification message indicates that the unit is about to shut down.
NOTE: The temperature warning message appears only on the home page.