Visual Manager User Interface
4-28 StorageWorks by Compaq Network Storage Router M2402 User Guide
COMPAQ CONFIDENTIAL
Writer: Kim L. Miller File Name: e-ch4 Visual Manager User Interface.doc
Codename: Part Number: 269782-001 Last Saved On: 2/22/02 4:14 PM
Fibre Channel module port settings:
• Link Status—indicates the port link status.
• Port Name High—sets a new value for the World Wide Port Name High.
CAUTION: If this configuration setting is incorrectly set, processing difficulties
may occur. Before changing this setting, evaluate the need for the change and
verify the desired setting. Compaq recommends backing up the router
configuration to an external file before making changes to this setting.
• Port Name Low—sets a new value for the World Wide Port Name High.
CAUTION: If this configuration setting is incorrectly set, processing difficulties
may occur. Before changing this setting, evaluate the need for the change and
verify the desired setting. Compaq recommends backing up the router
configuration to an external file before making changes to this setting.
• Port Mode—(default: N_Port) sets the port mode.
Port Mode settings:
— Auto Sense—In this mode, the Fibre Channel port tries to negotiate as a
loop. If it is not successful, then the Fibre Channel port negotiates as a fabric.
If the port comes up as a loop, it then determines whether it is on a private or
public loop.
— N_Port—(default) This mode allows the router to bypass the loop
negotiation and come up as a fabric only. If the router is on a loop, and
N_Port mode is selected, an error in communication may occur.
• Use Hard AL_PA—enables or disables Hard AL_PA usage.
• Hard AL_PA Settings—When Hard AL_PA usage is enabled, select Set
AL_PA Settings to display the AL_PA Lookup Table.
Use the table to find the node number. This unique one-byte valid value (derived
from an Arbitrated Loop Topology defined in ANSI specification FC_AL version
4.5) is used for the Fibre Channel configuration.
Figure 4-20 is an illustration of the AL_PA table.