Visual Manager User Interface
StorageWorks by Compaq Network Storage Router M2402 User Guide 4-17
COMPAQ CONFIDENTIAL
Writer: Kim L. Miller File Name: e-ch4 Visual Manager User Interface.doc
Codename: Part Number: 269782-001 Last Saved On: 2/22/02 4:14 PM
Active Fabric settings:
• Server-Free Backup Mode—toggles between Enabled and Disabled.
When enabled, server-free backup capability is enabled to allow Extended Copy
commands.
• Number of Controller LUNs—(default: 1) sets the number of controller LUNs
reported by the router.
The number must be in the range of 0 through 4.
NOTE: For Server -Free Backup Mode functionality, if addressing a controller LUN is desired,
at least one controller LUN must be enabled and included in a relevant map.
NOTE: If Server-Free Backup Mode is enabled, Fibre Channel Discovery must be enabled to
allow router access to Fibre Channel Targets.
For information on controller LUN and Extended Copy commands, see Appendix B,
“Controller LUN Commands.”
For general information about server-free backups, see Chapter 1, “Introduction.”