Filter
Top Products
Visual Manager User Interface
StorageWorks by Compaq Network Storage Router M2402 User Guide 4-51
COMPAQ CONFIDENTIAL
Writer: Kim L. Miller File Name: e-ch4 Visual Manager User Interface.doc
Codename: Part Number: 269782-001 Last Saved On: 2/22/02 4:14 PM
Utility Menu tasks:
• Beacon configuration—enable the Beacon mode.
• FTP Utility access—open an FTP session.
• Trace Settings configuration—configure trace settings.
• Current Traces display—view current trace information.
• Previous Traces display—view previous trace information.
• Last Assert Traces display—view last assert trace information.
• Clear Current Traces—clear current trace information.
• Clear Assert Traces—clear current trace information.
• Event Log Settings—configure Event Log settings.
• Event Log display—view the Event Log.
• Clear Event Log—clear the Event Log.
Each Utility Menu option is discussed in the following sections.
Beacon Mode Configuration
The Beacon Configuration screen is used to enable and disable the router Beacon
mode. When enabled, the Power LED located on the back-side of the router will
continuously blink, alternating between amber and green.
To enable the Beacon settings, select the ON checkbox and then click Submit.
Figure 4-33 is an example of the Beacon settings screen.