Visual Manager User Interface
4-48 StorageWorks by Compaq Network Storage Router M2402 User Guide
COMPAQ CONFIDENTIAL
Writer: Kim L. Miller File Name: e-ch4 Visual Manager User Interface.doc
Codename: Part Number: 269782-001 Last Saved On: 2/22/02 4:14 PM
NOTE: Auto-Assigned and SCC maps cannot be modified, cleared, filled, or have entries
deleted.
NOTE: Map settings are saved to memory when any button within the page is selected.
SCSI Map settings:
• Clear Map—clears all entries from the current map.
• Fill Map—fills in the current map.
When the map is filled, the display will show the current devices.
• Remove Gaps—removes any incremental gaps in the sequence of LUN listed in
the table.
When the system removes gaps from the table, the LUN are renumbered in
sequential order, starting with LUN 0.
NOTE: Some operating systems require gaps be removed in the mapping table to detect
all devices.
• Delete—deletes map entries.
To delete a range of LUNs, select the beginning LUN to delete from the ‘from’
drop-down box and select the last LUN to delete from the ‘to’ drop-down box.
• Discovered Device Entry—adds a discovered device to the map.
To add a discovered device to the map, use the drop-down boxes to enter the
settings, and then click Create Entry in the Discovered Device Entry section of
the screen.
• Manual Device Entry—creates a map entry for a device that is not yet
discovered or installed.
To add a new device to the map, use the drop-down boxes to enter the settings,
and then click Create Entry in the Manual Device Entry section of the screen.
NOTE: SCSI maps can be filled or devices can be added to them only when at least one
SCSI Target ID has been enabled in the SCSI bus configuration menu.